Description

DBX ZC-9

The DBX ZC-9 from dbx is a wall-mount programmable source selector for the ZonePro 1260 and 1261 digital zone processors. It features an eight-position rotary control with room beneath the knob for labelling. Two RJ-45 jacks are built-in for connection via CAT5 cables.

The DBX ZC-9 Zone Controller offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

Architects’ and Engineers’ Specifications:
The remote device shall provide rotary switch source selection for the ZonePro 1260 and 1261. The remote shall have DIP switch identification and connection to the device being controlled shall be via CAT 5 cable and RJ-45 connectors. The device shall be a ZC-9 remote control.

Features:

– The ZC-9 provides source selection for the ZonePRO 1260 and 1261.
– Programmable Volume Control
– Program or Scene Selection
– Programmable Contact Closure Interface
– Up to 1000 ft. on CAT 5 Cable
– Programmable Push-To-Talk Paging
– Programmable Source Selection

Specifications:

Connectors: (2) RJ-45
Series Wiring: Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.
Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000 ft.
Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher.
Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065