Innofader Pro – Professional Custom VCA Crossfader

SKU: Innofader Pro 

The Innofader Pro is a Professional Custom VCA Crossfader.

The Innofader Pro uses the same quality construction as the original Innofader .

Our Price: $150.00

Available: Online Only

Out of stock

Category:
Brand:

Description

The Innofader Pro is a Professional Custom VCA Crossfader.

The Innofader Pro uses the same quality construction as the original Innofader and fits the following mixers:

All of the Innofader compatible mixers
Rane TTM-56/57 and Pioneer DJM-800 without any extra adapters.
All Allen And Heath Xone mixers
Numark M series and Vestax VMC-002 without mods
Virtually any analog mixer that fits it, but possibly requiring mods.
All mixers previously requiring the Innofader + Innofader Output Adapter (Tascam XS-4, XS-8, old Ecler HAK 300/310/320)

In addition to being compatible with a wider range of mixers, the Innofader Pro has the following improvements over the original Innofader:

No polarity testing is required.
The Innofader Pro is a plug and play device for most mixers.
Works over a full +/- 15V or 0 to 30V range.
Allows crossfader forward reverse switching on all compatible mixers.

Features:

  • No bleed/cracking
  • Sturdy design – 8mm stem, long body type
  • No calibration required
  • Standard VCA output
  • Ultra wide range tension adjustment

New Innofader Pros with red stickers on the box and Innofader PNPs are compatible with BOTH the Pioneer DJM-800 and DJM-900 mixers. All parts needed for installation are included.****

Purchase the Innofader Pro if:
  • 1) You have a mixer with an analog, non-VCA fader.
  • 2) You want an option that will work on any current or future mixer you own.
  • 3) You also do mixing and want an accurate curve response and the widest range of curve adjustments.
  • 4) You have an A&H Xone:02 mixer
If you are afraid of electronics, we strongly urge you to have a technician help you with the installation!
The Innofader Pro fits the following mixers:
  • 1) All of the Innofader compatible mixers
  • 2) Rane TTM-56/57, Pioneer DJM-800, and Pioneer DJM-900 without any extra adapters.
  • 3) All A&H Xone mixers
  • 4) All mixers previously requiring the Innofader + Innofader Output Adapter (Tascam XS-4, XS-8, old Ecler HAK 300/310/320)
  • 5) Numark M series and Vestax VMC-002 without mods
  • 6) Virtually any analog mixer that fits it, but possibly requiring mods.
  • 7) Ecler Eternal Compatible mixers
In addition to being compatible with a wider range of mixers, the Innofader Pro has the following improvements over the original Innofader:
  • 1) No polarity testing is required. The Innofader Pro is a plug and play device for most mixers.
  • 2) Works over a full +/- 15V or 0 to 30V range.
  • 3) Allows crossfader forward reverse switching on all compatible mixers.
****NOTE: The latest Innofader Pros have a red sticker at the top right corner of the box. This indicates the following improvements:
Fixed noisy output on Vestax analog mixers
Added P&G cable for Denon mixers & Rane Empath
Added DJM-900 mounting bracket
Added insulator card on bottom
2 Vinyl marking stickers included
The Innofader Pro is a custom high-end scratch fader, now fits more mixers without extra adapters or mods – advanced non-contact capacitance technology – on-board curve and cut-in control – tension control – long life, ultra low maintenance – 8mm steel fader stem.
MANUFACTURER’S REVIEW The Innofader Pro uses the same quality construction as the original Innofader and fits the following mixers:
1) All of the Innofader compatible mixers (except for Ecler Eternal compatible mixers you will also need the Ecler Eternal Adapter)
2) Rane TTM-56/57 and Pioneer DJM-800 without any extra adapters.
3) All A&H Xone mixers
4) All mixers previously requiring the Innofader + Innofader Output Adapter (Tascam XS-4, XS-8, old Ecler HAK 300/310/320)
5) Numark M series and Vestax VMC-002 without mods
6) Virtually any analog mixer that fits it, but possibly requiring mods.
In addition to being compatible with a wider range of mixers, the Innofader Pro has the following improvements over the original Innofader:
1) No polarity testing is required. The Innofader Pro is a plug and play device for most mixers.
2) Works over a full +/- 15V or 0 to 30V range.
3) Allows crossfader forward reverse switching on all compatible mixers.